Amana Tool 55350 Carbide Tipped Ogee Reversible Stile and Rail Assembly 1-5/8 Dia x 11/16 x 1/2 Inch Shank

Amana Tool 55350 Carbide Tipped Ogee Reversible Stile and Rail Assembly 1-5/8 Dia x 11/16 x 1/2 Inch ShankCut both the stiles and rails with a single economical assembly. Switch from the stile cut to the rail cut simply by rearranging the cutters and bearing on the arbor. Because the profile and the cope are cut with the same cutter, you get a perfect fit. The assembly order for each setup is shown in the drawing. Use in a table mounted router. Guide straight cuts with the fence; use the pilot bearing only for cuts on curved rails or stiles.

Should be used in a table-mounted router

On a through-cut

the corner-rounding bit rounds an edge to a given radius

Amana Tool® dowel drills are coated with a special Polytetrafluoroethylene (PTFE)

This series has a small chipbreaker therefore the quality of cut will improve

A two-flute bit is a good general-purpose choice

Specifications UPC ID: 29292532488

shallow bowls

These sets include two trim cutters for stock 7/8" through 1" in thickness

reliable modular-crimp connector installation for voice- and data applications

Cut individual flutes - shallow

this is also the case for mitre cuts and solid worktops