Filaments Depot Yellow PLA

Filaments Depot Yellow PLAFilaments Depot PLA is quality virgin PLA . Both PLA resin and colorant are food grade material Made in Canada, Ontario utilizing sophisticated extrusion equipment and high tech drying technology. The filaments are monitored with live multi axis micrometer, and computerized diameter monitoring technology. Producing clean, repeatable and reproducible results. Made with recyclable spool and box Includes an extra resealable bag in the box Print settings

First layer usually 5°C-10°C higher than subsequent layers

1- Place the 3d printed part with HTPLA in Conductive oven on a piece of wood or aluminum foil

Direct Drive:

Grey: 430C

Print settings

The following test conducted on 3d printed samples  The one on the right was heat treated following the above steps and the sample on the left was not heat treated

Retraction Distance: 3mm

a tree is planted to help replenish our planet

27g/ml (25 °C))

You can increase the temperature in increments of 10-15 degrees Celsius (18-27 degrees Fahrenheit) every 10-15 minutes until the desired annealing temperature is reached

2- Heat the oven 90°C to 110°C--preferred temperature stable oven

Filaments Depot HT( High Temperature) premium PLA is high heat