Real Time Clock Module (DS1307) V1.1

Real Time Clock Module (DS1307) V1.1The DS1307 Real Time Clock developed by one of our designers: Waiman. The module comes fully assembled and pre programmed with the current time (ok, so it's our current time MST). The included Lithium coin cell battery (CR1225 41mAh) will run the module for a minimum of 9 years (17 years typical) without external 5V power. The DS1307 is accessed via the I2C protocol. Except the DS1307 real time clock, the module also integrate the I2C EEPROM

Get started in a jiffy with our detailed tutorial

set transceiver buffer

If you want to stack another shield on top or below

you'll get a single strip

The sensor comes with three wires: red (5-24VDC power)

where you can place a Grove - Encoder in and make it a rotary visual encoder

under well developed and maintained

This nifty adapter cable has a classic HDMI plug connector at one end and at the other end a DB-15 VGA connector (it has hex nuts that you can remove if you are trying to mate it with a cable that also has hex nuts)

such as Lipo Rider

Each of the red

We even wrote a very nice library for the backpacks so you can get running in under half an hour

5mm / 12" x 5