Door Header Fitting for Pole Tent

Door Header Fitting for Pole TentThis fitting is used to create a header bar to hang a door system in between two legs of a pole tent. This adjustable fitting is used in pairs along with a header pipe and assembly pins to create the complete header to hang the door from. Common pipe sizes used include: 9'4" 2" Pipe for 10' leg spacing and 6'10" 2" Pipe for 7'6" Spacing. Each item contains just one fitting and generally are ordered in sets of (2) ea. Specifications: Base Material:

This cable is used on 10' wide Jumbotrac Lite frame system to keep the eave framing from bulging outward from the weight of the upper rafter framework

The zinc plated steel tool is fitted with a rubber handle to provide a comfortable ergonomic position during use

Use a citrus based cleaner like CITRO to remove any excess adhesive from the fabric

Each length of tubing is drilled with parallel 7/16" diameter through holes located 3" from each end of the extrusion for connection to a 3/8" Diam

The benefit to using the Mid-Span Tensioner rather than just a strap and buckle comes in the angle of pull of the strap against the eave pipe member

Loose 10' long webbing end is constructed of high tensile polyester webbing and sewn to a 1" special snap hook that fits into a Festival CAN-T corner

Click HERE for the Product Manual

This item includes one 40x10 expansion middle used to extend a Gable or Hip Style Tent Top

The sides of the wall feature a hook/loop closure system to connect separate wall sections together

This cable is used on 30' wide traditional frame tents to keep the eave framing from bulging outward from the weight of the upper rafter framework

This fitting slides over the 2

This jig is specifically used on the Tidewater 59' wide Sailcloth Tent System