Jumbotrac JT1 21'10"

Jumbotrac JT1 21'10"This kedered aluminum tubing is used as a rafter in the Jumbotrac 40' wide frame tent system on the hip end only. Each length of tubing is drilled with parallel 7 16" diameter through holes located 3" from each end of the extrusion for connection to a 3 8" Diam. push button and an additional 9 16" holes for connection of braces. Specifications: Base Material: 4. 65" x 2. 06" JT1 Extrusion 6061 T6 Structural Aluminum Tubing, ID 1. 750", OD 2. 06", and

This is only the bottom 9' section of the pole

5oz/sqyd (288gsm) cotton and measures 58"w x 84"h

The bottom of the wall is hemmed with a pocket to allow use of the Jumbotrac Plus Wall tensioning system (sold separately)

Base Material: 2

This kedered aluminum tubing is used as a rafter beam in the Jumbotrac 15' wide frame tent systems

Base Material: Welded Aluminum

The flange component measures 4" in diameter and when assembled the flanges have a separation distance of 2-1/4"

and swaged to a thimble and hook ends

The sections include a 9' Bottom section and a 9' top section

The adjustable design of this brace allows it to be used on corner legs

This cable is used on 40' wide Jumbotrac frame system to keep the eave framing from bulging outward from the weight of the upper rafter framework

This is the intermediate fitting for the Jumbotrac gable ended frame tent design that is placed between the two rafter beam sections on the gable end