139cm rib length- 5 Rib, 1mm steel panel, Floor pan half, classic car restoration

139cm rib length- 5 Rib, 1mm steel panel, Floor pan half, classic car restoration!! NEW !! Long pressed ribbed steel panels in 1mm mild steel, 5 ribs wide Rib gap across the panel is around 10 to 11 cms apart. Ribs are finished with a neat flat spear end, both ends (see pics). Ribs are approx. 139cms long and sit approx. 2,5cms to the end of the steel sheet . (approx. 144cms overall length) Ribs are approx. 25mm width in total and approx. 8mm deep. Panel is approximately 68 to 70cms wide over all. Panels may have a little

40mm or 50mm wide x 1mm thick x 1000mm length mild steel strips

Picture does a better job than my explanation

we can fold longer sections

very good surviving early 59 Mini

Decorative steel etc etc

5 CMS long (in direction of ribs) and  75

ideal for model making or Classic/custom car panel straighteners***

care should be taken when handling any sheet steel

August 59 (start of production) to mid October 1959 Mini pan half

6 ribs over the width approx

Ribs are ALL approx 42cms long and sit approx 6cms in from the rib tip to the edge of the steel one end and 2 / 2

25mm width in total and approx