JT Lite Base Plate 2' Adj.

JT Lite Base Plate 2' Adj.This is an adjustable baseplate for the Jumbotrac Lite system. The adjustment pattern starts at ground level and allows for adjustment up to 24" in 3" pre drilled increments. The fitting is welded from precision cut 1. 25" Schedule 40 steel pipe and then powder coated with a grey gloss coating. The dimensions of the 1. 25" SCH 40 pipe are 1. 660" OD and 1. 380" ID.

The Kedermount™ PRO is a professional-grade

or Festival CAN-W tent top

The long end of this ratchet strap is sewn to a 1-1/2" diameter steel ring that allows it to be hooked over the tensioning nub on the baseplate

Height of wall is 8'0" and the finished width is 10'6" to allow for the hook/loop overlap and a little space to go around corners of your tent

This fitting is used along the eave of the tent as an intermediate fitting between eave pipes on the Jumbotrac Lite frame system

Then clean area with regular tent cleaning solution and allow to dry before folding

This rope is commonly used in valance tensioning applications

This is the fitting for the Standard Rolling Canopy Jack 10'10" (#Z51400010) and the XL Rolling Canopy Jack 13'8" (#Z51400020) used to connect the Jack Mast to the Winch mechanism

(4) Festival Rope Tensioner

Flagpole designed for use on the Tidewater Sailcloth Tent but can be utilized on any pole style tent where the centerpole pin is less than 0

75" OD pole sections this bag serves as a great solution to store and transport poles for over-the counter type pole tents

The top pin is a friction fit and is installed by hand then hammering into final position with a rubber mallet or by simply tapping on the ground