Carbon, Brass & Copper SEM Cylinder Mounts

Carbon, Brass & Copper SEM Cylinder MountsThe carbon SEM specimen mounts are made from spectrographically pure, the highest purity grade, graphite rods. Total impurity level does not exceed 2ppm and typically less than 1ppm per element. These mounts are ideal for analytical SEM and microprobe work since the only element which can be detected with EDS or WDS systems in their specimen mounts is C. Both electron and X ray absorption is much higher than compared with the standard type aluminum or

The sample is mounted on the bottom of the insert and the two rear micrometers are adjusted and the micrometer nearest the sample is retracted to produce a wedge shape as material is removed from the sample

Technical grade carbon rods have a typical impurity level of around 50ppm or greater

this holder also accepts a standard 12

Material  Part number Copper 7HXC300 Nickel 7HXN300 Pattern Pitch microns Mesh Hole microns Bar microns Transmission % Tolerance +/-microns  7HX_300 85 300 54 31 40 5

• Width: 8mm (0

"Spectro Tabs Brand"

36 and 48 stub holders)

PELCO® Quickstick 135 is a clear wax with a slight green color

#815-80 to 815-87-5 SDS (107KB PDF)

allowing for a maximum 12mm (3/8") specimen height

GSB-100 Storage Box for 100 FIB lift out grids or storing standard 3mm TEM grids flat

Material  Part number Copper 7HFGC400 Nickel 7HFGN400 Gold 7HFGG400