JT Keder Feeder (2pc Set)

JT Keder Feeder (2pc Set)The JT Keder Feeder is a 2pc feeder set to aid in the feeding of keder material into the frame of the Jumbotrac and Jumbotrac Lite frame tent systems. The system features High Density Urethane wheels to feed the keder material into the aluminum tracks of the beam without jamming and binding. Each 2pc set attaches to the eave fitting of the system and locks into place with a thumb screw. These feeders are not designed to work on other manufacturers

A 100lb down force on the handle generates a 1600lb upward force and a 3200lb gripping force on the stake

100" wall thickness

The plate has a stake hole able to receive up to a 1

hip end frame tent designs 15' wide and smaller (i

083 wall thickness

The Single Canopy Door Set (L) is an economical product to add a functional egress point to most any frame tent or frame structure

**This is a single cable assembly

This slide fitting for the traditional hip or gable ended frame tent design is used to create a ridge brace across two rafter pipes in the same frame arch

This fitting is a cast aluminum fitting that sides over the outside of the 2

This cable is used on both 15'x15' and 15'x15' expansion modules of the Festival frame tent systems

The cable is precision fabricated from 1/4" galvanized steel aircraft cable and swaged around a large loop

5"w x 55"h